Slava Novorossiya

Slava Novorossiya

Tuesday, December 15, 2015

SIG Sauer P230 Handgun




SIG P230 / P232

Sig Sauer P230 SL as viewed from right. Note hammer cocked. Serial number digitally obscured. Hogue grips are factory installed on the SL model.
 A SIG P230 SL
Type
Semi-automatic pistol
Place of origin
Germany, Switzerland
Service history
Used by
See Users
Production history
Designed
1977
Manufacturer
SIG Sauer, SIGARMS
Produced
1977–1996
Specifications
Weight
520 g (18.5 oz)
Length
17 cm (6.6 in)
Barrel length
9.1 cm (3.6 in)
Width
3.0 cm (1.2 in)
Height
12 cm (4.7 in)


Double Action/Single Action (DA/SA) With decocking lever
Feed system
8-round magazine (.32 ACP)
7-round magazine (.380 ACP & 9mm)
Sights
Fixed front and rear


The SIG Sauer P230 is a small, semi-automatic handgun chambered in .32 ACP or .380 Auto. In 1996 it was replaced by SIG Sauer with the model P232.

  

Laura Gerard (January Jones) stands up holding Cancer's P232.
Design

The design and function of the P230 is of the simple fixed barrel, straight blow-back configuration. It has a reputation as a well-built firearm, and competes with the smaller Walther PPK. With its relatively narrow slide and frame it can be carried in an ankle holster or beneath body armor.

The P230 was available in both blued and all-stainless finishes. The blued version features a blued steel slide and a matching, anodized aluminum frame, whereas the stainless version was completely made from stainless steel. Both versions came with a molded polymer, wrap-around grip that is contoured to give the shooter a comfortable and secure hold on the pistol.

The trigger comes from the factory with a 24 newtons (5.5 lbf) single-action pull, and is capable of both single-action and double-action. Pulling back the slide sets the hammer backwards and downwards to its single-action position, making for a very short trigger pull, with minimal take-up. The double-action pull is longer and more stiff. It has no external safeties, though it does have a de-cocking lever positioned just above the right-handed shooter's thumb, on the left side of the grip. The lever provides for a safe method of lowering the hammer from its full-cocked, single-action position, to a "half-cock", double-action safe position where the hammer itself falls forward to a locking point about an eighth of an inch from the rear of the firing pin. Once de-cocked, it is physically impossible for the hammer to drop completely and contact the firing pin, which would otherwise greatly increase the risk of the unintentional discharge of a chambered round. In order for the round to discharge, the full double-action pull would have to be completed, which allows for the pistol to be carried reasonably safely with a round chambered. In addition, the SIG P232 has an automatic firing pin safety.

The sights are of the traditional SIG design and configuration, with a dot on the front sight and a rectangle on the rear sight. To aim using the sights, the shooter simply aligns the dot over the rectangle. The magazine release is located behind and below the magazine floor plate. The magazine is released by pushing the lever towards the rear of the grip, at which point the magazine can be removed from the pistol.

  

Laura opens fire without blinking, demonstrating her skill.
Overview

Due to its small dimensions, it is easily carried as a backup weapon or as a concealed carry handgun, holding 8 + 1 rounds of .32 ACP or 7 + 1 rounds of .380 ACP (9mm Kurz), respectively. A special police model was available, chambered in 9mm Police, actually a 9×18mm casing, which is very similar to 9mm Kurz but slightly more powerful.

Users

No comments:

Post a Comment